Transfer email from one google account to another
I recently signed up the netinlet.com email for Google apps for you domain
I had all my mail funneling to a gmail account to begin with, so I need to get all that email from the first google account to the new google apps account.
You can do with with POP, but you have to put in a different pop server name. Use pop.googlemail.com instead of pop.gmail.com. pop.gmail.com will not allow you to access via pop. Go figure.
Everything else stays the same, just make sure to use ssl on port 995.
The process takes a while. Mine has been running for about a half an hour and has only pulled over 300 emails so far. I have mine setup to pull over all email, so everything (INBOX, SENT, ARCHIVED) gets stuck into the inbox on the google apps account.
Google Apps – html verify takes a long time
I recently signed up the netinlet.com domain and a friends work domain for the Google Apps
You have to verify ownership of the domain to get the ball rolling. They allow you to either upload a unique html page to the domain or add a cname entry which points to google.com. I chose the former because it was simple and easy to do.
Google tells you up to 48 hours before the account is active. Well, 48 hours came and went. Then a whole week came and went and I heard nothing. Searches for why this was taking so long did not turn up much.
I finally stumbled upon some http log entries which show google was trying to verify. The entries looked like this:
216.239.36.136 – - [27/Mar/2007:22:58:25 +0000] “GET /googlehostedservice.html HTTP/1.0” 412 258 “-” “Jakarta Commons-HttpClient/3.0.1”
Look, a clue! Notice the 412 error code.
After some more hunting, it turns out that the verification process is triggering Apache mod_security. Luckily, the fix is simple.
If you don’t already have one, create a .htaccess file in you webserver root directory. In this file put
SecFilterEngine Off
My host is textdrive and I found a textdrive specific fix here but this fix should apply to almost everybody who is getting 412 error codes in their log files.
The Dead Mac and the Improved Google Reader
Well, my iMac G5 died Friday morning. The power shut off while checking email and it just looses power when trying to boot again. After talking to Apple support Friday night… prognosis: bad power supply. This is the second time the Mac died in less than a year. Last time it was right before Christmas. That time, the transistors on the mother board went bad and I had to replace the mother board. Luckily, after the first incident (just days before the 1yr warranty went out) I purchased the extended warranty.
One good thing did come out of this, finding the new and improved Google Reader A while back, I had imported all my NetNewsWire subscriptions into it. I never used it much because the interface was too primitive. So, wanting my rss feeds Friday night, I gave it a try again.
Whoa! Apparently they just updated the UI that day. The interface is very usable. Once they fix a couple of kinks, like occasionaly not iterating to the next unread message, I may be able to replace NetNewsWire. I’m especially happy because I can use it at work on my linux box too. The Google Reader developers made me a very happy camper.
Reinstall Solaris 10 on a T2000
My biggest gripe with the T2000 so far is actually with Solaris package management. pkgadd sucks because it does not handle dependencies and will not automagically download stuff from Sun. I really which they had something like the FreeBSD ports collection or apt-get or yum or something which automatically downloaded and install dependencies.
The T2000 ships (the one I received atleast) with Solaris 10 1/06 release. I want to play with ZFS which was included in the 6/06 release. Plus, I hope installing some of the other packages will be easier if I install the developer packages with some amount of libraries.
So not being able to find out how to upgrade the system from 1/06 to 6/06, I downloaded the 6/06 release and am doing a reinstall.
Since the T2000 does not ship with a video card, you have to install from the console. Not having used Solaris very much , it took a little while to figure out how to get the box to boot from the cdrom.
The trick is to get to the ok prompt. You can do this by logging in as root on the console and issuing the following command:
shutdown -y -g0 -i0 now
This leaves the server running but in init mode 0.
Now, you can boot from the cdrom and start the installer with the following command.
ok boot cdrom – nowin
This will start the installer in the console mode, rather than in X.
4-Sale – 1999 Suzuki Intruder
Well, I’ve decided to sell my motorcycle. I will not stop riding though. I like it too much!
The Suzuki Intruder was a great first bike. It runs great and is pretty much indestructible.
The main reason I am selling it because it is uncomfortable on longer rides (1 hour commute to and from work). I’m 6’2 and there is not a whole lot of legroom on the bike for someone this tall. I find myself pushing back against the pegs into the hump of the seat alot. This leads to alot of lower back aches.
Look no further if you desire a fun, reliable motorcycle.
the T2000 has arrived
The T2000 has arrived!
I can’t wait to see what this thing will do with ruby and postgresql. This one has 6 cores and 8 gig of ram.
I will more than likely have to send it back at the end of the 60 day trial, but i’m very excited to get to use it as a test server in the meantime.
It’s time to put on my admin hat!
synergy – the kvm switch replacement
At work, I regularly use two computers, my primary development box (linux) and my other development box for the windows specific piece of the program I am working on.
I have one keyboard and mouse two monitors. I tried using a KVM switch, but that sucked because every time I would switch from linux to windows and back, the scroll wheel on my mouse quit working on the linux box.
I also tried using VNC for a while, but found the screen drawing was too slow.
On one of my rss feeds this morning, I ran across Synergy. This is one sweet program!
You designate one of your computers the primary computer and start a synergy server on that computer. On the other computer, you start a synergy client. Now, all you have to do to move the keyboard and mouse from one computer to the other is push the mouse to one side of the screen from either computer. So when I am on the linux box and want to use the windows box, I just push the mouse to the right of the screen and I am then using the windows computer. To get control back to the linux box, I just push the mouse to the left side of the screen, and voila! I’m working on the linux box again.
This setup only works if you have two monitors and one keyboard/mouse. And… it works very, very well.
TIP:
I start synergy daemon on the linux(master) box with crontab. On the windows box, there is a gui option to start looking for the master when the computer is turned on.
@reboot /usr/bin/synergys —daemon —config /path/to/synergy.conf
mocking up your website
It just so happened that I started mocking up the UI for the project that I am working on today and stumbled across Denim
This looks really cool. It’s definitely a unique piece of software. I was starting to get frustrated to already with the limitations of not having a big enough piece of paper to sketch legible drawings (and be able to read later). And I really do not want to drudge through uml diagrams.
I know what I’m going to be playing with tonight. Thanks for the link Howard.
ruby 1.8.4 on FreeBSD core dumps
I spent the better part of the last couple of days trying to track down why after upgrading to Ruby 1.8.4 on FreeBSD, I started getting core dumps in one particular place in my application.
After much time on IRC and some gdb voodoo I finally figured out the source of the problem. There appeared to be a stack management problem. Even with 64 meg of stack space, ruby would core dump. This behavior did not occur on OSX.
I emailed the ruby-core mailing list and one of the FreeBSD guys got right back to me.
Apparently the problem is with the freebsd pthread implementation and ruby.
Solution – install the port ruby18-nopthreads
Magically the problem disappears.
quick script for adding new svn files to repository
svn status | grep ? | awk ‘{print $2}’ | xargs svn add
This is on a FreeBSD box. I have noticed xargs on linux is slightly different – on linux try changing the xargs line to codeprexargs -i -t svn add {}/pre/code